Sony has a new laser projector that will be launching next month (available for pre-order for now) that sits on the Sony flagship throne. The new VPL-VW1025ES (model) 4K HDR laser projector for home theaters. A consumer-level projector (at not so consumer-level price).
You get 2,200 lumens, dynamic HDR, 4K up to 60p, plenty of lens shift to play with (although not as much as some of the Epson models we have worked with), ?: 1 dynamic contrast, IMAX Enhanced support, and what we can assume will be a fantastic image, all via Sony’s SXRD system.
As with many prosumer projectors, it will take a few others to help you mount it since it packs a whopping weight of 49 pounds. All of that weight, just hanging off your ceiling. But hey, no pain no gain, right? Well, until you see the price tag.
This new projector weighs in at $39,998. So as I said, a not so consumer-friendly price. This is quite common with any of these flagship 4K models though. However, there will be many buyers looking to get their hands on one when they release next month (if they aren’t already on the pre-order list).
The new model will be launching around May 7th. We’ve provided some links here as well as some additional specs below for your consumption.
*Average price is based on the time this article was published
Specifications:
Size & Weight
- DIMENSIONS (W X H X D)
22.06″ x 8.78″ x 19.53″ - WEIGHT
Approx. 49 lb (22 kg)
Display
- DISPLAY SYSTEM
4K SXRD panel, projection system - LIGHT SOURCE
Laser diode - PICTURE PROCESSOR
X1™ for projector - DISPLAY RESOLUTION
720 x 576/50p, 720 x 480/60p, 1280 x 720/50p, 1280 x 720/60p, 1920 x 1080/50i, 1920 x 1080/60i, 1920 x 1080/24p, 1920 x 1080/50p, 1920 x 1080/60p, 3840 x 2160/24p, 3840 x 2160/25p, 3840 x 2160/30p, 3840 x 2160/50p, 3840 x 2160/60p, 4096 x 2160/24p, 4096 x 2160/25p, 4096 x 2160/30p, 4096 x 2160/50p, 4096 x 2160/60p
General Features
- CONTRAST RATIO
?: 1 (Dynamic Contrast) - FFECTIVE IMAGER SIZE
0.74″ x 3 - EFFECTIVE PIXELS
26,542,080 (4096 x 2160 x 3) pixels - PROJECTION LENS SHIFT
VPLL-Z7008 (Optional): Powered V ±50%, H ±18%, VPLL-Z7013 (Bundled): Powered V ±80%, H ±31% - THROW RATIO
VPLL-Z7008 (Optional): 0.85:1 to 1.06:1, VPLL-Z7013 (Bundled): 1.35:1 to 2.90:12
Hardware
- PROJECTION LENS ZOOM / FOCUS
Powered
Interface
- INPUT AND OUTPUT TERMINALS
HDMI (2 INPUTS) – Digital RGB/Y Pb/Cb Pr/Cr, IR IN – Minijack, LAN – RJ45, 10Base-T/100BASE-TX, REMOTE – RS-232C, D-sub 9-pin (male), TRIGGER (2 INPUTS) – Minijack, DC 12 V Max. 100 mA, USB – DC 5 V, Max. 500 mA
Operating Conditions
- OPERATING TEMPERATURE / HUMIDITY
41°F to 95°F (5°C to 35°C)/20% to 80% (no condensation) - STORAGE TEMPERATURE / HUMIDITY
10 °F to +140 °F (–10 °C to +60 °C)/20% to 80% (no condensation)
Power
- ACOUSTIC NOISE
24 dB - POWER REQUIREMENT
AC 100 V to 240 V, 4.9 A to 2.2 A, 50/60 Hz - POWER CONSUMPTION
490 W
Video Features
- LIGHT OUTPUT
2,200 lm - COLOR LIGHT OUTPUT
2,200 lm
Eco and energy saving
- POWER CONSUMPTION (STANDBY MODE)
0.4 W (When “Remote Start” is set to “Off”) - POWER CONSUMPTION (NETWORKED STANDBY MODE)
1.0 W (LAN) (When “Remote Start” is set to “On”) When a LAN terminal is not connected, it becomes a low power consumption mode (0.5 W). - STANDBY MODE ACTIVATED
After about 10 Minutes
In The Box
- Remote Control (RM-PJ24)
Size AA (R6) manganese batteries (2)
AC Power Cord (1)
Lens Cap (1)
Operating Instructions (CD-ROM)
Quick Reference Manual
Safety Regulations (1)
Short Throw Lens – VPLL-Z7008 (Optional)
April 20, 2021 at 09:55AM
https://ift.tt/3n7f3rN
Sony's new native 4K HDR laser projector (VPL-VW1025ES) is waiting for your home theater - Poc Network
https://ift.tt/2ZeUDD8
Sony
No comments:
Post a Comment